Heavy Duty LED 212 Waterproof Solar Security Light With Motion Sensor

Solar Light Size: Length 157 mm X Width 116 mm Height 57 mm  (6” X 4.5”)

Solar panel size: 4.33’ X 4.17”

Solar panel: Monocrystaline 5.5V 1.43W

LED specification: 212 SMD2835, 0.3W/PCS

Lifespan: 30000 hours; Working Time: 30000 hours

Input Voltage(V): 5.5 V,

Color Temperature (CCT): 3500K (Cool White)

Battery Capacity: 3.7 V, 2400 mah

Beam Angle: 270°

Working Temperature (℃): -20 - 60

Lamp Body Material: Premium quality PC+ABS

IP Rating: IP65

Certification: CE, RoHS

Light Source: LED; Power Supply: Solar

Output Power: 3.7V, 7W, Solar Charging

Illumination range: 30m²

Control: Intelligent light control

Induction: Human Induction

Protection: Rainproof and lightning protection

Switch: One button switch

Warranty (Year): 1-year

Single package size: 16 cm X12.5 cm X 6 cm

Rechargeable Battery Powered

The AA Li-ion Battery 18650 is 2400 mAH (included) and is already installed.

To replace the battery, switch the solar light to “OFF” mode and unscrew the back case to inspect or replace the Li-ion Battery 18650 rechargeable battery.

The replacement 18650 battery can go up to 3500 mAH for extended use.

You can easily install LED 212 solar lights at home. Just take out the light from the box and use the attached 2 screws and anchors to install. Don’t try to set up the mode during the daytime as the light won’t respond during the daytime. Go back to the light after dusk to set up your desire mode.

This light has 3 modes:

Mode 1: light stays dark, turns on with full blast with any sorts of motion for 30 seconds

Mode 2: light stays dim, turns on with full blast with a motion for 30 seconds. Then goes back to dim mode again

Mode 3: light is Constantly on with 50% strength, no motion sensor 

When you are done installing, press the little switch (switch is under/beside the big round motion sensor) gently 1, 2 & 3 times to set your desired mode for the light.